|
The
Traktronix
DIY System from £125
 |
| Traktronix
- Integrated Receiver |
 |
| Customer
built Traktronix transmitter (CR1/3N) |
 |
| Traktronix
transmitter (CR1130) |
|
Why
not build your own telemetry set? With
our easy-to-assemble electronics kit. No
specialist knowlege or skills are required, the
radio modules are ready-assembled and there's
only one adjustment to make - and that's made by
ear. All required construction is through hole,
- no surface mounting required. No potting
needed. Complete with instructional web pages
(delivered by email) & support group.
|
- Integrated
Palm Held system
-
Pocket Sized
Antenna with bayonet fit rods. Systems fit
into the Pocket Case
- Two
transmitters with
6
or 12 day** Battery Life
- Range
up to 5-6
miles (Ground-Tree*) or
10-15
miles (Ground-Air*)
- Easy
to Build 6-12 hours construction
time, no special knowlege or tools needed
- Ready-made
Transmitter & Receiver modules!
- High
Quality Components
- Track
up to 2 birds Simultaneously
- 3-step
variable audio metering system accurate
to around 3 feet
-
Ready built Transmitter options: Screw
top or open frame. High visibility LED,
midi, micro or long range
|
*
- Measured with falconer on ground
** -
Continuous Operation |
- Operates on 433
MHz., so its OK worldwide
- Suitable for
hawks (or falcons if desparate), average
range 1-2 miles in levelish, mixed terrain,
or around 1/2 - 3/4 mile over flat, open
ground, with transmitter on ground.
- Pocket sized.
- Pseudo 2 channel,
c/w 2 transmitters, distinguished by tone
pattern
- Take-apart
antenna with bayonet rods.
- High quality
extruded aluminium case with aluminium front
panel & black plastic bezel & rear
panel.
- Assembly time
6-12 hrs
- Only 2 components
in transmitter, which is an open-frame type
using a CR1/3N battery - life 12 days
continuous, or a CR1130 battery - life 6
days continuous
- Includes labels &
zipped, padded case.
|
Tools
required |
- Drill & bits
(pref a drill press/pillar drill)
- Soldering Iron &
sponge
- Craft Knife &
scissors
- Rivet Gun
- Tin snips (a very
cheap pair will do)
- Screwdrivers, pliers,
wire cutters & strippers.
- Spanners (wrenches) &
an allen (hex) key
- Electric heat gun.
- Basic multimeter
|
| Traktronix
Kit (Remote antenna option) |
 |
| Traktronix
Receiver assembled |
 |
PULSAR-7
2 years Warranty
Three
Stage 3-volt Transmitter
H
Click picture for details
H |
 |
HAWKTRACK
2
years Warranty
Single
Stage 3-volt Capsule Transmitter
H
Click picture for details
H |
|
MICRO-X
1
year Warranty
Single
Stage 3-volt Lightweight Transmitter
H
Click picture for details
H |
 |
 |
PRICE
LIST |
 |
Transmitters
have been colour-coded according to range:
- Medium
Range up to 5-6 miles
(Ground-Tree*) or 10-15 miles
(Ground-Air*)
- Long
Range up to 10 miles
(Ground-Tree*) or 30-40 miles
(Ground-Air*)
|
All
systems include 2 x Single
Stage Transmitter Modules, Padded Case, &
all necessary electronic components &
hardware.
Tailmount
& batteries not included.
Transmitters
require 1 x CR1/3N (12 days) or CR1130 (5 days)
|
|
Traktronix
Kit
complete |
UK |
£125
+ £10 |
|
Traktronix
Kit
complete |
Rest
of world (Airsure) |
£125
+ £15 |
|
Extras
& Ready-built Transmitters
One
set of transmitter batteries supplied for each
ready-built transmitter ordered.
Please
order extras with complete systems only from
this section - not
spares! |
Optional
Ready-made
Wiring Harness
Pre-wired
switch, battery contacts, and board plugs, with
board headers & LED socket. Greatly
simplifies assembly. |
£15 |
|
Extra
for
Custom
Canvas Case
Pocket
case with fur lining, rolled edge & leather
antenna rod pocket
This
case will also be supplied FOC if standard case
unavailable |
£5 |
|
Extra
Twin
Transmitter Kit
Single
Stage Transmitters |
£35 |
|
Tailmount
Spring Prong (French Clip)
for
Traktronix
transmitter |
£5 |
|
Double-Deck
Tube Tailmount
to
fit BIRD - for use with spring prong (French
Clip)
|
£5 |
|
Ready
Built
Hawktrack
Transmitter
(Screw Top) with LED c/w tailmount kit |
£65 |
|
Ready
Built
Micro-X
Transmitter
(Open
Frame - 5-6 days)
(order
tailmount kit separately if required) |
£50 |
|
Ready
Built
Pulsar-7
Transmitter
(Screw Top) with LED
c/w
tailmount kit |
£85 |
|
Extra
Tailmount
Spring Prong (French Clip)
for
Ready-built
transmitter |
£8 |
|
Extra
Double-Deck
Tailmount - to
fit BIRD
for
use with Bewit Loop |
£3 |
|
Extra
Batteries,
pkt. 3 (Lithium)
Pulsar-7/Traktronix
- CR1/3N |
New
Low Price
£9 |
|
Extra
Batteries,
pkt.5 (Lithium)
Micro-X/Traktronix
- CR1130 |
£5 |
|
Extra
Batteries,
pkt 6 (alkaline)
for
Hawktrack - AG5/754 |
£4 |
|
| System
Details |
- Frequency:
433.92 MHz. on UHF,
- Daylight
visible LED power indicator, and bleeper
- High
quality, padded zipped case
- Double
Conversion Superhet Receivers for ultimate
sensitivity (-148 dB)
- SAW
stabilised frequency lock on receivers &
transmitters to eliminate drift. No tuning
required
- Surface
Mount construction for reliability
- Highly
directional H-Beam antenna with bayonet fit
elements. 7.5 dB gain and 15 dB front/back
ratio
- Metal-screened
receiver module for close-up performance
- High
Visibility Flashing LED indicator on many
ready made transmitters (Hawktrack/Pulsar 7)
- visible up to 3/4 mile at night., or
easily found in vegetation
- Short
unbreakable Teflon coated stainless steel
transmitter wire
- Lightweight
system
- Rotary
range control (75dB)
- Multi-level
sounder with no volume adjustment needed
- Designed
and manufactured in Britain
|
|
12 months
warranty on all components, subjest to
satisfactory assembly & tailmounting of
transmitter. |
Back
to top of pageG
|
VHF
Systems |
UHF
Systems |
VHF
& UHF
Transmitters |
Dog
& Cat |
Spares
& Accessories |
|
.co.uk
P.T. Chapman 1990-2007
